System Menu; Entering And Exiting The System Menu; Code Options - GE Simon XT User Manual

Tabletop control panel
Hide thumbs Also See for Simon XT:
Table of Contents

Advertisement

24
Simon XT TableTop Control Panel
User Manual

System menu

Your self-contained security system security system allows you to program certain user options, such as access
codes, time schedules, or the system time. These options are accessed through a system menu.

Entering and exiting the system menu

To enter the system menu, press the scroll up/down buttons or the Enter button in the upper right of the panel.
Press Status to exit a menu or option edit mode and navigate up one level. Pressing Status while in the top
menu level exits the system menu. The panel automatically exits the system menu after a few seconds of
inactivity if no access code has been entered yet. After an access code has been entered to access a code-
protected area of the system menu, the timeout is 30 seconds (four minutes while performing a sensor test).

Code options

The security system provides a system of codes to be entered when a certain level of authority is required to
perform an action. These codes allow you to activate system options, customize panel operations, and generate
a silent alarm. The default code is based on the code length (3, 4, 5, or 6-digit code) determined at installation.
The code types are listed in Table 10.
Table 10. System codes
Code
Master code
User codes 1 through 8
Duress code
Note: Any combination of invalid codes in excess of 40 keypresses (such as fourteen invalid three-digit codes) will cause a
system access alarm. The alarm locks all touchpads, except keyfobs, for 90 seconds.
Description
The master code is the main code used for panel operations. The default code will be 123,
1234, 12345, or 123456 depending on the value set by the installer for code length.
These eight codes are supplemental user codes. These codes can be used for panel
operations such as disarming, but not programming. These codes can be any 3, 4, 5, or 6-
digit code, depending on the code length.
The duress code is used to generate a silent duress alarm while disarming.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simon xt tabletop

Table of Contents