GE Simon XT User Manual page 40

32 Simon XT TableTop Control Panel
User Manual
To program panel voice, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel voice, then press Enter.
4. The current value of this option now flashes. Scroll up/down to toggle this option on/off, then press
Enter.
5. Press Status repeatedly to exit.
Panel piezo alarms. Loud alarms on the siren. This option determines whether or not the panel sounds
alarm beeps.
To program panel piezo alarm, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel piezo alrm, then press Enter.
4. The current value of this option now flashes. Scroll up/down to toggle this option on/off, then press
Enter.
5. Press Status repeatedly to exit.
Status beep volume. This option sets the sound volume of nonalarm beeps. The numerical range is 1 to
10. The default value is 7.
To program status beep volume, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Status beep vol, then press Enter.
4. The current value of this option now flashes (1 to 10). Scroll up/down to the desired value, then press
Enter.
5. Press Status repeatedly to exit.
Speaker volume. This option sets the sound volume of the panel speaker for keypresses and alarm
sounds. The numerical range is 1 to 8. The default value is 8.
To program speaker volume, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Speaker volume, then press Enter.
4. The current value of this option now flashes (1 to 8). Scroll up/down to the desired value, then press
Enter.
5. Press Status repeatedly to exit.