Communicating With Your System - GE Simon XT User Manual

4 Simon XT TableTop Control Panel
User Manual

Communicating with your system

You can send commands or instruct your security system through a series of keypresses on the panel,
touchpads, or a remote telephone.
Table 2. System communication devices
Device
Control panel
Handheld Touchpad
Simon XT TableTop Touchpad
Keyfob
Telephone
Note: The default master code is 1-2-3-4 when the security system is shipped from the factory. You should change your code
after your system is installed. See
Description
You can enter commands for your security system through simple keypresses on the panel.
Depending on how your system is programmed, you may need to enter an access code for
certain commands. An access code is a numeric code that allows authorization to operate
your security system.
This touchpad gives you the option to enter commands from any room in your house. You
can enter commands through simple keypresses on the touchpad.
This touchpad gives you the option to enter commands from any room in your house. You
can enter commands through simple keypresses on the touchpad.
Keyfobs are handy for simple arming, disarming and light control functions. They are
portable and can be carried offsite in a purse or pocket.
Touchtone telephones can be used to communicate with your system while you are offsite.
Ask your installer if you have this feature.
Code options on page 24.