Operational Note Regarding These Instructions; Setup Menus; Entering Setup Mode; Lights - GE 45633 User Manual

• Some Z-Wave devices may have to be within two feet of the
remote during the setup process.
• If the screen displays FAILURE, you have pressed an invalid
key or the desired action has not been successfully completed.
Please try again.
• When controlling Lights, Groups or Scenes: If the display indi-
cates FAILURE, the remote has not successfully communicated
with the device. Try again if this occurs.
• Dimming a GE brand dimmer to its lowest brightness level Does
Not turn the light off even though it may appear off. You must
press and release the Off key to actually turn it off.

Operational Note Regarding These Instructions:

The following instructions direct you to press various buttons or
keys on the remote. Unless otherwise noted, the word "press"
means "press and release". The instructions will specifically state
"press and hold" if this is required.
Setup Menus – Press and hold SETUP button until display changes
to LGHT SETUP. Use either arrow key to select desired menu item.
LGHT SETUP
GRP SETUP
SCN SETUP
ALL SETUP
LOCK SETUP

Entering SETUP Mode

Press and hold the SETUP button until the display changes to
LGHT SETUP. Use either arrow key to select the desired menu and
press OK to enter that mode.

LIGHTS

THERMOSTAT
TRANSFER
NETWORK
EVENTS
DATE/TIME
10
ADV CONFIG
ASSOCIATE
ABOUT