GE Simon XT User Manual page 18

10 Simon XT TableTop Control Panel
User Manual
Arming/disarming
Arming a sensor makes it active and allows the panel to generate an alarm when a door or window is opened,
or when an unauthorized person enters a specific area. Disarming makes the sensor inactive in the system. The
current arming level is shown on the panel display and changes in arming level are announced on the speaker.
Subdisarm
To subdisarm, do the following:
1. Enter the master code while the system is disarmed.
2. The panel displays and speaks Subdisarmed, the Disarm button blinks, and the panel beeps once.
3. When you've finished accessing the temporarily unprotected areas, press Disarm to return to
Disarmed.
Disarm (off)
To disarm, do the following:
1. Press Disarm, then enter your code when the panel displays Enter code.
2. The panel displays and speaks Disarmed, the Disarm button lights up, and the panel beeps once.
Arming doors and windows
To arm the doors and windows, do the following:
1. Ensure that all doors and windows are closed.
2. Press Doors+Windows, then enter your code when the panel displays Enter code, if a code is required.
3. The panel displays Doors+Windows, speaks Doors and windows on, and the Doors+Windows button
lights up.
4. The panel starts an exit delay, and sounds exit beeps in groups of two until the exit delay expires.
Arming motion sensors
To arm the motion sensors, do the following:
1. Press Motions, then enter your code when the panel displays Enter code, if a code is required.
2. The panel displays Motions, speaks Motions on, and the Motions button lights.
3. The panel starts an exit delay and sounds exit beeps in groups of three until the exit delay expires.
Arming doors, windows, and motion sensors
To arm the doors, windows, and motion sensors, do the following:
1. Press Doors+Windows, then enter your code when the panel displays Enter code, if a code is required.
2. While the panel is in the process of arming, press Motions.