Understanding The Lights; Armed Light; Bypass Light; Cancel Light - GE NetworX NX-8E User Manual

UNDERSTANDING THE LIGHTS

Armed Light

The armed light is "on" when the system is armed. The armed light is "off"
when it is disarmed. The armed light will flash when there has been an alarm
during the previous arm cycle.

Bypass Light

The bypass light is "on" when any zone in this keypad's partition is bypassed.
The zone(s) that is bypassed will also be illuminated. If the bypass light is "off",
no zones are bypassed.

Cancel Light

The cancel light will flash during an abort delay time. If a code is entered
followed by the [CANCEL] key while this light is flashing, all abortable reports
will stop the communication process. Note: The abort feature must be
enabled. Entering a code followed by the [CANCEL] key during or after an
alarm report to the central station will cause the cancel light to come on. It will
stay on until the central station has received the cancel report. Note: The
cancel feature must be enabled.

Chime Light

The chime light is "on" when the chime feature is "on"; "off" otherwise.

Exit Light

The exit light is "on" during the exit delay. Please note that the light will flash
during the last 10 seconds of the exit delay as a warning that the time is
running out. (The user may want to disarm the system if the exit light is
flashing in order to prevent an alarm. The user may then re-arm the system and
exit before the delay expires.)

Fire Light

A steady fire light means a fire zone has been faulted. A rapidly flashing fire
light means that a fire zone is in a trouble condition.

Instant Light

The instant light is "on" when there is no delay on your entry/exit door(s). Any
time the instant light is "on" and the exit delay has expired, the opening
of an entry/exit door will produce an immediate alarm. The instant light can
be toggled on or off by pressing the [Stay] key while the system is armed.
When the instant light is "off", the entry/exit door(s) is delayed.

Power Light

The power light is on if the primary power is on. The power light will flash if the
system has a low battery condition.
7