34
Simon XT TableTop Control Panel
User Manual
7. Press Status repeatedly to exit.
Housecode. To change the housecode, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Light control, then press Enter.
3. Scroll up/down to Housecode, then press Enter.
4. The current option value (A to O) now flashes. Scroll up/down to the desired value, then press Enter.
5. Press Status repeatedly to exit.
Sensor-activated light lockout time. Each light (unit numbers 1 to 8) that has been tied to a sensor can be
programmed not to turn on during a certain time of day.
To program the lock interval, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Light control, then press Enter.
3. Scroll up/down to Lock interval, then press Enter.
4. Scroll up/down to the unit number for which you want to program a lockout time, then press Enter.
5. The current option value now flashes. Program the start and end times (see
page 33).
6. Press Status repeatedly to exit.
Light schedules
on