Table of Contents
Advertisement
DIS Digital Conference System
#
Menu
18.
19.
Settings
User Manual CU 6110 rev C.docx
User Manual
Description
Activating the 'Arrow Down' button
in the right upper corner reveals a
window with options to change
settings for a range of seats (the
graphics is only showing four of the
eight outputs).
Ambient Microphone –
Used to enable/disable a connected
AM 6040 Ambient Microphone Unit.
When 'enabled', the Ambient Noise
Microphone is active.
When 'Audio In 1 or 2' is routed to
'Loudspeaker'' and 'Audio In
Volume' is set to a value between
40dB and 0dB the microphone will
be disabled.
If 'Audio In 1 or 2' is not routed to
'Loudspeaker'' or 'Audio In Volume'
is set to off, the microphone will
stay disabled until enabled.
Please refer to section '6.7 AM 6040
Ambient Microphone' for more
details about using an ambient
microphone.
Operation mode –
Used for switching between the
operation modes. Please refer to
the section '6.6 Operation Modes'.
Delegate interrupt mode –
Used to set the 'Delegate Interrupt
Mode'. Please refer to section '6.6.2
Delegate Interrupt Mode'.
37
Advertisement
Table of Contents
