Table of Contents
Advertisement
DIS Digital Conference System
Turns off first microphone in the speak list, and turns on first microphone from the request list.
If a microphone is turned off, the CU sends a 'mic_off' command.
If a microphone is turned on, the CU sends a 'mic_on' command and a 'mic_request_off' command.
10.2.1.8
Set max total speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
<max total speakers> Can be set to "1" to "8"
The CU responds by sending a 'max_total_speakers' command.
10.2.1.9
Set max delegate speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> Can be set to "1" to "8"
The CU responds by sending a 'max_speakers' command.
10.2.1.10
Set max requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> Can be set to "0" to "250".
The CU responds by sending a 'max_requests' command.
10.2.1.11
Set operation mode
mic_mode <mode><CR>
Set system operation mode.
<mode> Can be set to "auto" (Automatic), "fifo" (First-in-first-out), "manual" (Manual) and "vox" (Voice Active)
The CU responds by sending a 'mic_mode' command.
10.2.1.12
Set interrupt mode
mic_interrupt <mode><CR>
Set ability to interrupt. Defines, whether microphones should interrupt or not.
For CU 59XX <mode> Can be "on" (microphones interrupt) and "off" (microphones do not interrupt)
For CU 6110 <mode> Can be "Same", "Lower" and "Off"
The CU responds by sending a 'mic_interrupt' command.
10.2.1.13
Set Mic priority
mic_priority <seat_number> <priority><CR>
User Manual CU 6110 rev C.docx
User Manual
57
Advertisement
Table of Contents
