Shure CU 6110 User Manual page 58

DIS Digital Conference System
This command sets the priority of a microphone.
<seat_number>: The microphone to adjust
<priority>: The desired priority. Possible values: 0 to 5, where 0 is the lowest priority and 5 is the highest priority.
The CU responds to this command by returning a 'mic_priority' message.
10.2.1.14 Retrieve microphone status
mic_status<CR>
Ask the cu to deliver status of the system (microphones in speak, and microphones in request list).
The CU responds by sending microphone system status. The status is a list of commands from the CU:
seat_state
mic_priority
mic_interrupt
mic_mode
max_total_speakers
max_speakers
max_requests
mic_on
mic_request_on
mic_status_done
10.2.1.15 Help
help<CR>
help <command><CR>
Help information is available listing all commands supported by the CU. If a command is included in the
help command, details on that command is returned.
Note: The help command results in a number of command lines returned from the CU. The command is intended for use in a
simple console.
(for all units in the system)
(for all units in the system)
(for all units in speakers list)
(for all units in request list)
User Manual CU 6110 rev C.docx
User Manual
58