Voting Control; Commands From External Control To The Cu 6110 - Shure CU 6110 User Manual

DIS Digital Conference System
10.3.2.10 Audio status complete
audio_status_done<CR>
This command terminates audio status streaming.
10.4

Voting Control

10.4.1

Commands from External Control to the CU 6110

10.4.1.1 Start a voting session
start_voting <voting_session_id><CR>
Starts a voting session in the CU
<voting_session_id>: Identification of the voting configuration to start.
The CU replies with 'voting_started', if a voting session is started.
10.4.1.1.1 SW 6000 controlled
The voting_session_id defines which voting configuration to run. A list of configurations can be
requested by command 'voting_status'.
If no voting_session_id is specified, the default SW 6000 voting configuration is requested.
10.4.1.1.2 Standalone
voting_session_id defines the build-in voting configurations:
'1' 3-button voting
'2' 3-button secret voting
'3' 5-button voting
'4' 5-button secret voting
If no voting_session_id is specified, the configuration '1' is requested.
10.4.1.2 Stop a voting session
stop_voting<CR>
Used to stop an ongoing voting session in the CU. If the voting session is stopped, the CU replies with
'voting_stopped'.
10.4.1.3 Cancel a voting session
cancel_voting<CR>
Used to cancel an ongoing voting session in the CU. If the voting session is cancelled, the CU replies with
'voting_cancelled'.
10.4.1.4 Start attendance check session
start_attendance_check<CR>
Used to start an attendance check session in the CU. If an attendance check session is started, the CU
replies with 'attendance_check_started'.
10.4.1.5 Stop an attendance check session
stop_attendance_check<CR>
User Manual CU 6110 rev C.docx
User Manual
66