5. Secure in place with the screws provided, making good contact with
6. Replace the chassis or system cover(s), making sure no cables are
Figure 1-10. TMCP700/MCP750 Mating Configuration
http://www.motorola.com/computer/literature
the backplane. Refer to
Configuration for the correct board/connector orientation.
the transverse mounting rails to minimize RF emissions.
pinched. Cable the peripherals to the panel connectors, reconnect
the system to the AC or DC power source, and turn the equipment
power on.
MCP750
TMCP700 Transition Module Installation
Figure
1-10. TMCP700/MCP750 Mating
TMCP700
1
1-25