Hardware Configuration; Vp22 Motherboard Preparation; Table 1-2. Vp22 Jumper Settings - Motorola VP22A/IH1 Installation And Use Manual

Unpack the equipment from the shipping carton. Refer to the packing list
and verify that all items are present. Save the packing material for storing
and reshipping of equipment.
Caution Avoid touching areas of integrated circuitry; static discharge can damage
!
circuits.
Caution

Hardware Configuration

To produce the desired configuration and ensure proper operation of the
VP22 motherboard, you may need to carry out certain hardware
modifications before installing the motherboard.
The VP22 provides software control over all but one option, CMOS clear.
This option is controlled through the manual installation or removal of a
header jumper.

VP22 Motherboard Preparation

Figure 1-1
other components on the VP22 motherboard. The only manually
configurable header on the motherboard is listed in
default setting is enclosed in brackets. For the connector pin assignments
on the VP22, refer to
Jumper Function
JP1
Note
The VP22 is factory tested and shipped with the configuration described in
the following section.
http://www.motorola.com/computer/literature
illustrates the placement of the header, connectors and various
Chapter 3, Connector Pin

Table 1-2. VP22 Jumper Settings

Settings
CMOS Clear [1-2]
2-3
Items in brackets are factory default settings.
Hardware Configuration
Table 1-2. The header's
Assignments.
Normal
CMOS clear
1
1-3