Equipment Required - Motorola MCP750 Installation And Use Manual

Equipment Required

The following equipment is required to complete an MCP750 system:
MCP750 modules are factory configured for I/O handling via a TMCP700
transition module. There are various MCP750 models available that
correspond to different memory configurations. One transition module
supports all configurations of the board.
Note
Refer also to the appropriate sections on the MCP750 and transition
module installation for additional information.
http://www.motorola.com/computer/literature
CompactPCI system enclosure
System console terminal
Operating system (and/or application software)
Disk drives (and/or other I/O) and controllers
Transition module (TMCP700) and connecting cables
Contact your local Motorola sales representative and/or your
designated sales/systems engineer for the latest configuration
specifications on the various MCP750 models available.
Equipment Required
1-3
1