High Availability Supported Commands; Table 5-2. High Availability Specific Debugger Commands - Motorola MCP750 Installation And Use Manual

Table 5-1. Debugger Commands (Continued)
Command
TT
VE
VER
WL
Although a command to allow the erasing and reprogramming of Flash
!
memory is available to you, keep in mind that reprogramming any portion
of the MCP750's Flash memory (bank B) will erase everything currently
Caution
contained in the Flash memory, including the PPCBug debugger.

High Availability Supported Commands

The following table lists PPCBug debugger commands that have been
added to support High Availability (HA) features.

Table 5-2. High Availability Specific Debugger Commands

Name
PEEPROM
PCIDOM
PWROFF
PWRON
PCIIOI
You can list the syntax for one of these commands using the HE command
with the command name. For example,
shows the syntax for using the PWROFF command to power an I/O
module.
http://www.motorola.com/computer/literature
Description
Trace to Temporary Breakpoint
Verify S-Records Against Memory
Revision/Version Display
Write Loop
Description
Program/Verify the HSC EEPROM
Initialize/Control PCI Bus Domain
Power Off an HA PCI Bus Module
Power On a HA PCI Bus Module
PCI Domain I/O Inquiry
HE PWROFF <Return>
Using PPCBug
5
5-11