Intermec EasyCoder PC4 Service Manual page 35

Ribbon Core Holders
E-ring
Washer
Spring
Ribbon core holder
Intermec EasyCoder PC4—Service Manual
The ribbon core holders are spring-loaded and hold the ends of the ribbon
cores opposite to the ribbon feed mechanism. A green plastic disc is press-
fitted on a metal shaft, that goes through the left-side wall of the print
frame moulding. The shaft is held by an E-ring inside the Feed button
cavity. A spring on the shaft makes it possible to snap the core in place. No
adjustments are facilitated.
Chapter 4 —Print Fram
29