Options - Intermec EasyCoder PC4 Service Manual

1.2 Options

Intermec EasyCoder PC4—Service Manual
The power supply unit (PSU) accepts 100 to 240 VAC/50 to 60 Hz. The
power supply has a standard 2-pin input voltage socket, so various types of
power cords can be used according to local voltages and standards.
The power supply has a fixed 1.5 m (4.9 ft) long cable that is connected to
the printer's rear plate.
The available options for the EasyCoder PC4 are memory cartridges, USB,
serial and parallel interface cables, a keyboard/display unit, a paper cutter,
a battery unit and an assortment of power cords. Refer to the EasyCoder
PC4, Spare Parts Catalog or Spare Parts List for updated information.
Chapter 1—Models and Options
3