Table of Contents
Advertisement
How to Use This Manual
Conventions Used in This Manual
iv
• Unit
• k: Denotes 1000. Example: 5 kg, 100 kHz
• K: Denotes 1024. Example: 640 KB
• Note
The following markings are used in this manual.
Improper handling or use can lead to injury to the user or damage
to the instrument.
indicate that the user must refer to the user's manual for special
instructions. The same symbol appears in the corresponding place
in the user's manual to identify those instructions. In the manual,
the symbol is used in conjunction with the word "WARNING" or
"CAUTION."
Calls attention to actions or conditions that could cause serious or
WARNING
fatal injury to the user, and precautions that can be taken to prevent
such occurrences.
Calls attentions to actions or conditions that could cause light injury
CAUTION
to the user or damage to the instrument or user's data, and
precautions that can be taken to prevent such occurrences.
Calls attention to information that is important for proper operation
Note
of the instrument.
• Bold Characters
Bold characters are mainly characters and numbers that appear on the display.
• Subheadings
On pages that describe the operating procedures in Chapter 2 and 3, the following
symbols are used to distinguish the procedures from their explanations.
This subsection describes the setup parameters and the limitations
Explanation
on the procedures.
Follow the numbered steps. All procedures are written with
Procedure
inexperienced users in mind; depending on the operation, not all
steps need to be taken.
This symbol appears on the instrument to
Advertisement
Table of Contents
