Table of Contents
Advertisement
2.3 Configuring the Ethernet Interface
2-4
IP Address, Subnet Mask, and Default Gateway
key to select Ethernet and then press the
1.
Press the
Basic=Ethernet
key to select Local IP and then press the
2.
Press the
Ethernet=Local IP
3.
Set the IP address of the recorder and then press the
Key operations
• Use the
key to select the digit for entering a value.
• Use the
key to select the value you wish to enter.
A=
4.
Set the IP address of the subnet mask and then press the
fashion as in step 3.
M=
5.
Set the IP address of the default gateway and then press the
same fashion as in step 3.
The local IP setting complete screen appears.
G=
Ethernet address
Setting complete
6.
Press the ESC key to return to the higher level menu. To save the settings and
exit from Basic Setting mode, proceed to "Saving the Settings."
DNS (Domain Name System)
key to select Ethernet and then press the
1.
Press the
Basic=Ethernet
2.
Press the
key to select DNS and then press the
Ethernet=DNS
key to select On and then press the
3.
Press the
DNS=On
4.
Set the IP address of the primary DNS server and then press the
Key operations
• Use the
key to select the digit for entering a value.
• Use the
key to select the value you wish to enter.
P=
5.
Set the IP address of the secondary DNS server and then press the
the same fashion as in step 4.
S=
* When the
key,
key, or
the operation is reversed as when the respective key is pressed by itself.
CHARACTER
key is pressed while holding down the SHIFT key,
key.
key.
key.
key in the same
key in the
key.
key.
key.
key.
key in
Advertisement
Table of Contents
