Table of Contents
Advertisement
8.
9.
Saving the Settings
1.
2.
3.
Explanation
You can limit the users that can access the Setting/Measurement and Maintenance/Test
servers on the recorder via the Ethernet interface.
• Enabling/Disabling the Login Function
Set whether to use the login function.
• Registering Users
• User level
• Administrator
• User
• Selecting Whether to Register (On/Off) the User
• Setting the User Name
• Setting the Password
* When the
the operation is reversed as when the respective key is pressed by itself.
Set the user name and then press the
Key operations
• Use the
key to select the digit for entering a character.
• Use the CHARACTER key to select the character type.
• Use the
key to select the character you wish to enter.
User=
Set the password and then press the
The setting complete screen appears.
Password=
Ethernet login
Setting complete
To register other users, press the
8, and 9.
Press the ESC key to return to the Basic= screen.
Press the
key to select End and then press the
Press the
key to select Store and then press the
The settings are activated, and the Operation mode screen appears.
Select either of the user levels, administrator or user.
One administrator can be registered. An administrator has the authority to use all
Setting/Measurement server and Maintenance/Test server commands.
Six users can be registered. A user has limited authority to use the commands.
See section 4.2.
If On is selected, set the user name and password.
• Set the user name using up to 16 alphanumeric characters.
• The same user name can not be registered.
• Since the word "quit" is reserved as a command on the recorder, the user name
"quit" is not allowed.
Set the password using up to 4 alphanumeric characters and spaces.
key,
key, or
CHARACTER
2.5 Registering Users
key.
key in the same fashion as in step 8.
key to return to step 6 and repeat steps 8,
key.
key.
key is pressed while holding down the SHIFT key,
2
2-9
Advertisement
Table of Contents
