Omega RD100B User Manual page 54

SD Sets the date and time.
Syntax SD p1<terminator>
p1 Date and time (fixed to the YY/MM/DD
HH:MM:SS format)
YY Year (00 to 99, the lower 2
digits)
MM Month (01 to 12)
DD Day (01 to 31)
HH
Hour (00 to 23)
MM Minute (00 to 59)
SS
Second (00 to 59)
SD?
Query
Example Set the recorder clock to 13:00:00, December 1,
2004.
SD 04/12/01 13:00:00
Description • The format of p1 is fixed to 17 characters. An
error results if a space is inserted in positions
other than the specified positions.
• On the RD100B with system version 1.02 or
earlier, the parameter p2 can be used.
p2 Standard time or DST (winder, summer)
Winter Standard time
Summer DST
VT Sets the dot printing interval
(dot model).
Syntax VT p1<terminator>
p1 Dot printing interval setting.
AUTO
Automatically adjust the dot
printing interval according to
the chart speed.
FIX
Record at the fastest printing
interval.
VT?
Query
Example Record at the fastest printing interval.
VT FIX
Description When trend recording is performed on 6
channels, the fastest printing interval is 10
seconds.
SZ Sets zone recording.
Syntax SZ p1,p2,p3<terminator>
p1 Channel number
p2 Leftmost position of the zone (RD100B: 0 to
95, RD1800B: 0 to 175) [mm]
p3 Rightmost position of the zone (RD100B: 5
to 100, RD1800B: 0 to 180) [mm]
Query SZ[ p1]?
Example Display channel 02 in a zone between 30 and 50
mm.
SZ 02,30,50
Description • Be sure that p3 is greater than p2 and that the
zone width (p3 – p2) is greater than or equal
to 5 mm.
• On models with the computation function (/M1
option), computation channels can be
specified.
SP Sets the partial expanded
recording.
SP p1,p2,p3,p4<terminator>
Syntax
p1 Channel number
p2 Partial expanded recording ON/OFF (ON,
OFF)
p3 Boundary position (1 to 99) [%]
p4 Boundary value
SP[ p1]?
Query
Example Set the 25% position of channel 01 to 1.000 V.
SP 01,ON,25,1000
Description • When the input range is set to SKIP (SR
command), p2 cannot be turned ON.
• Set p3 as a percentage where 100 mm is
assumed to be 100%.
• Parameter p4 can be set in the range
(leftmost value of span + 1) to (rightmost
value of span – 1). If scaling is enabled, the
range is (leftmost value of scaling – 1) to
(rightmost value of scaling + 1). Set the
parameter using an integer.
• This setting is possible when partial expanded
recording is enabled (UK command).
• This command cannot be used if the partial
expanded recording range does not exist
(when the span width is set to 1, for example).
• On models with the computation function (/M1
option), computation channels can be
specified.
• When the computation equation setting (SO
command) is turned OFF, p2 cannot be
turned ON.
VR Turns ON/OFF the recording on
each channel.
Dot model
VR p1,p2,p3<terminator>
Syntax
p1 Channel number
p2 Trend recording ON/OFF (ON, OFF)
p3 Periodic printout ON/OFF (ON, OFF)
Query VR[ p1]?
Example Turn trend recording ON and turn periodic
printout OFF on channel 06.
VR 06,ON,OFF
Description On models with the computation function (/M1
option), computation channels can be specified.
Pen model
VR p1,p2<terminator>
Syntax
p1 Channel number
p2 Periodic printout ON/OFF (ON, OFF)
VR[ p1]?
Query
Example Turn periodic printing ON on channel 01.
VR 01,ON
Description On models with the computation function (/M1
option), computation channels can be specified.
4.4 Setting Commands
4-13
4