Omega RD100B User Manual page 55

4.4 Setting Commands
ST Sets the tag.
Syntax ST p1,p2<terminator>
p1 Channel number
p2 Tag string (up to 7 characters)
ST[ p1]?
Query
Example Set the tag of channel 02 to TI-2.
ST 02,TI-2
Description • For the characters that can be used for the
tags, see appendix 1, "ASCII Character
Codes."
• On models with the computation function (/M1
option), computation channels can be
specified.
SG Sets the message.
Syntax SG p1,p2<terminator>
p1 Message number (1 to 5)
p2 Message string (up to 16 characters)
SG[ p1]?
Query
Example Set character string "START" in message
number 1.
SG 1,START
Description For the characters that can be used for the
messages, see appendix 1, "ASCII Character
Codes."
SE Sets the secondary chart speed
(used by the remote control
function (/R1 option)).
SE p1<terminator>
Syntax
p1 Secondary chart speed
See the explanation.
Query SE?
Example Set the chart speed to 50 mm/h.
SE 50
Description Select the chart speed from the list of choices
below.
Pen model
5 to 12000 mm/h (82 levels, see section 4.3)
Dot model
1 to 1500 mm/h (1 mm steps)
SV Sets the moving average
(dot model).
Syntax SV p1,p2<terminator>
p1 Channel number
p2 Number of samples for computing the
moving average (OFF, 2 to 16) [times]
SV[ p1]?
Query
Example Set the number of samples for computing the
moving average of channel 02 to 12.
SV 02,12
Description • This setting is available on the dot model.
• This setting is possible when moving average
is enabled (UI command).
4-14
SF Sets the input filter (pen model).
Syntax SF p1,p2<terminator>
p1 Channel number
p2 Filter time constant (OFF, 2s, 5s, 10s)
SF[ p1]?
Query
Example Set the filter of channel 02 to 2 s.
SF 02,2s
Description This setting is possible when the input filter is
enabled (UJ command).
BD Sets the alarm delay time.
BD p1,p2<terminator>
Syntax
p1 Channel number
p2 Alarm delay (1 to 3600) [s]
Query BD[ p1]?
Example Set the alarm delay of channel 01 to 120 s.
BD 01,120
Description • This setting is possible when the alarm delay
function is enabled (UF command).
• On models with the computation function (/M1
option), computation channels can be
specified.
VF Sets the brightness of the display
(VFD) and internal illumination.
Syntax VF p1,p2<terminator>
p1 VFD brightness (1 to 8)
p2 Internal illumination (OFF, 1 to 4)
OFF
illumination.
Query VF?
Example Set the display (VFD) brightness to 2 and the
internal illumination to 1.
VF 2,1
Description The brightness increases as the value increases.
TD Sets the DST.
Syntax TD p1,p2,p3,p4,p5,p6,p7,p8,p9<terminator>
p1 Use/Not use DST (USE, NOT)
p2 DST start time: month (Jan, Feb, Mar, Apr,
May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec)
p3 DST start time: number of the week in the
month (1st, 2nd, 3rd, 4th, or Last)
p4 DST start time: day of the week (Sun, Mon,
Tue, Wed, Thu, Fri, or Sat)
p5 DST start time: hour (0 to 23)
p6 DST end time: month (Jan, Feb, Mar, Apr,
May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec)
p7 DST end time: number of the week in the
month (1st, 2nd, 3rd, 4th, or Last)
p8 DST end time: day of the week (Sun, Mon,
Tue, Wed, Thu, Fri, or Sat)
p9 DST end time: hour (0 to 23)
TD[ p1]?
Query
Turns OFF the internal