Bmc Remote Management Console; Initial Configuration Using Adhcp Server - Dell PowerEdge C410x Hardware Owner's Manual
Servers
Hide thumbs
Also See for PowerEdge C410x:
- Getting started manual (123 pages) ,
- Hardware owner's manual (65 pages) ,
- Getting started (62 pages)
Table of Contents
Advertisement
5
BMC Remote Management Console
This chapter provides information on the various functions of the Dell Remote Management Console GUI's
(Graphics User Interface).
Initial Configuration using a DHCP Server
Before entering the Dell Remote Management Console, you need to connect the DHCP server in the
subnet to which it is physically connected. If a DHCP server is found, it may provide a valid IP address,
gateway address and net mask. Before you connect the device to your local subnet, be sure to complete
the corresponding configuration of your DHCP server. It is recommended to configure a fixed IP
assignment to the MAC address of the system.
BMC Remote Management Console | 77
Advertisement
Table of Contents
