Eco Dect; Setting The Alarm Clock - Siemens Gigaset C610H User Giude

ECO DECT

ECO DECT
You are helping to protect the environment
with your Gigaset handset.
Reducing energy consumption
By using a power-saving adapter plug, your
telephone consumes less power.
Reducing radiation
(dependent on base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
automatically reduced depending on the
distance to the base.
You can reduce the radiation of the handset
and base even further by using Eco Mode or
Eco Mode+. For further information, please
refer to your base user guide.
36

Setting the alarm clock

Prerequisite: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
É
¢ ¢
v
Alarm Clock
¤
You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
¼
In idle status, the
are displayed.
A wake-up call is signalled on the
display and with the selected ringtone
¢
( page 2). The wake-up call sounds for 60
seconds. If no key is pressed, the wake-up
call is repeated twice at five minute intervals
and then switched off.
During a call, the wake-up call is only
signalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
page 14).
icon and wake-up time