Wacom cintiq 13HD User Manual page 62

Double-clicking is difficult.
The eraser selects everything
or will not stop erasing.
You notice a delay at the
beginning of pen or inking
strokes.
You have to press hard with
the pen when clicking,
drawing, or writing.
The pen tip does not function.
The pen tip and screen cursor
do not properly line up.
Changing the function settings
for an input tool has no effect.
Contents
• Be sure you are quickly tapping the screen twice in the same place.
Wacom recommends using the side switch to
double-click.
• Open the Wacom Tablet control panel and go to the P
Try increasing the T
F .
EEL
• Set an ExpressKey to D
• Windows: Try setting your system to launch programs with a single
click. See clicking.
Open the Wacom Tablet control panel and go to the E
Move the E
RASER
increase the C
controls and input
Open the Wacom Tablet control panel and go to the P
Try decreasing the T
move the T
IP
to turn off double-click assist.
Open the Wacom Tablet control panel and go to the P
Move the T
IP
decrease the S
• Be sure you are using only the pen that came with your product,
or a Wacom accessory pen specified for use with the Cintiq 13HD.
Other pens may not function properly on the Cintiq.
• Check the Wacom Tablet control panel P
C function is assigned to the pen tip.
LICK
• Make sure the status LED lights white when the tip is pressed. If the
LED does not light, verify that the USB cable is plugged into an
active port on your computer or on a USB hub.
• If the LED still does not light, you may have defective hardware (see
troubleshooting).
Open the Wacom Tablet control panel and select the C
Continue with
Make sure you change the settings for the tool and application that you
are using. See
tools.
Contents Index
Index
D C
IP OUBLE
C
OUBLE
F slider toward F
EEL
T setting. If this does not help, see
LICK HRESHOLD
tools.
D C
IP OUBLE LICK
D C D
OUBLE LICK ISTANCE
F slider toward S
EEL OFT
and C
ENSITIVITY LICK
calibrating the cintiq.
application-specific settings
D or using a lighter T
LICK ISTANCE
.
LICK
RASER
, or select C
IRM USTOMIZE
EN
D . If that does not work,
ISTANCE
slider to the O position in order
FF
EN
, or select C
USTOMIZE
T settings.
HRESHOLD
tab and verify that a
EN
ALIBRATE
and working with multiple
62
tab.
EN
IP
tab.
... and
testing
tab.
tab.
... and
tab.
62