Wacom Cintiq DTK-2260 Important Product Information

Important Product Information
(DTK-1660, DTK-2260)
PRECAUTION
Improperly setting up, using, or caring for this product can increase the risk of an
accident or human injury.
Do not use the tablet in a facility control system that requires extremely high
reliability. It may cause other electronic devices to malfunction, or other devices
may cause the tablet to malfunction. Make sure the device is switched off in
locations where their use is banned to prevent interference with other electronic
equipment. Wacom cannot be held responsible for damages.
Avoid damaging the cable. Do not place heavy objects on the cable, repeatedly
bend it sharply, or apply heavy stress to the cable connector. Damage to or
laceration of the cable, or water or other liquids coming into contact with it, may
result in malfunction, electric shock or the outbreak of fire.
Do not use a distorted or bent pen nib with the pen. A nib in this condition may
cause the pen to operate improperly and scratch your tablet. Avoid using too
much presure with your pen to prevent the nib from bending or distorting.
Do not store the pen so that the pen tip or buttons are continually depressed.
To ensure the safe operation of the product, be sure to follow all instructions,
cautions, and warnings found within this guide. Failure to do so could cause
damage to the product and your computer, or loss of data. Failure to do so could
also void your warranty, in which case Wacom will have no responsibility to repair
or replace the product.
This tablet serves and should only be used as a passive display and input device.
Only use a power adapter specified for use with the product. If a different type of
power adapter is used, the product will not work properly or may be damaged.
Using a different type of power adapter also has the potential to result in fire. Use
of a different power adapter will void your warranty.
Regularly remove dust build-up from the power plug. The addition of moisture,
etc., to accumulated dust may create a fire hazard.
Do not connect or disconnect the power adapter with wet hands. Ignoring this
warning may result in electrical shock or product malfunction.
Do not insert foreign material into the USB port, video connector ports, or any
other opening of the product. If a metal object or foreign material is inserted into a
port or other opening of the product, it may cause product malfunction, fire, or
electrical shock.
Do not connect or disconnect the video or power cables while this product or
your computer are turned on; this may damage the display or computer video
card. In this case, Wacom will have no responsibility to repair or replace the
product.
Use an appropriate computer and video card which support the input/output
terminal on the product to avoid the damage to it.
Do not block the ventilation holes; this may overheat and damage the unit.
Air blowing from the ventilation hole, the ventilation hole periphery and the bottom
of the product become hot, it may cause low temperature burns.
Please note especially those with weak skin.
When not using the product for long periods of time, unplug the power adapter
from the AC outlet.
The product is for use with the included cables. Using inappropriate cables may
damage the product.
Keep the AC adaptor and the product in a well-ventilated place. If used in a poorly
ventilated place, it may overheat and cause it to malfunction, decreasing the
product life.
Unplug the AC adapter if any of the following conditions exist:
• The power cord or plug has become frayed or damaged.
• The AC adapter is exposed to rain, liquid, or excessive moisture.
• The AC adapter case is damaged.
• You suspect the AC adapter needs service or repair.
• You want to clean the AC adapter.
Protect the health of your eyes when using the product:
• Only use it in a well-lit room and view the display from a suitable distance.
• Take regular breaks when using the product for extended periods of time.
Take care of the following points in regards to the LCD display.
Do not push down forcibly with the pen on the LCD display. Pushing down forcibly
on the display may cause ripple-like, striped patterns to temporarily appear on
the display. The ripples disappear when you stop pushing down with the pen.
The following conditions are characteristics of LCD displays and do not indicate
damage or malfunction to the product.
• Depending on the displayed contents, brightness may appear uneven.
• Depending on the displayed contents, a small amount of lit and unlit red or
blue dots may be visible.
• When displaying objects with delicate patterns, you may see flickering or
striped patterns.
• After displaying the same still image for an extended period of time, a residual
image may be visible. Residual images will gradually disappear over time.
• Changes to the condition of the back light over the period of using the display
will gradually affect the condition of the display.
• Depending on the angle that you view the display from, the colors and hues
may appear changed.
When moving the product, ensure all cables are fully disconnected from the
power outlet, computer, and other areas. Tripping over loose cables can cause
physical damage or personal injury.
Do not place the product on any unsteady or wet surface. Do not place or use it
on slanted or unstable surfaces or areas where vibration is present. Physical
damage or personal injury may result if the product falls from an unsuitable
surface.
If you need to adjust the position of the product while using it, be careful to move
it slowly and gently.
Do not sit on, or hang from, the table or other surface where the product is placed.
The product may fall and cause physical damage or personal injury. Take extra
care where children are present.
If the LCD screen has been damaged, DO NOT touch any liquid that may be
leaking from it; this liquid is an irritant. In case of contact with skin, eyes, or
mouth, rinse immediately with running water for at least 15 minutes. If contact is
made with the eyes or mouth, consult a physician.
1
1