Customizing Pen Buttons - Wacom cintiq 13HD User Manual

CUSTOMIZING PEN BUTTONS

Select the P tab to change the functions assigned to the side switches and tip of your pen.
EN
Double-click here to change the function assigned to the
pen tip. The tip must be set to C
most graphics applications.
You can change the S
like the pen to work when using click functions.
To access the S S
IDE
O ... button at the bottom of the control panel. In
PTIONS
the O dialog box:
PTIONS
• Select H C
OVER LICK
without touching the pen tip to the Cintiq's screen
surface.
• Select C & T
LICK
touching the pen tip to the pen screen surface in
order to perform a click function. C
enables the precise placement of your click
functions, and is the default setting for Tablet PCs.
R
• Choose or
IGHT
handed orientation.
• Check the Pressure Compatibility box as needed for
use with older applications that support only 1024
pressure levels.
Contents
in order to draw in
LICK
S M to fit the way you
IDE WITCH ODE
M settings, click on the
WITCH ODE
to perform click functions
and press the side switch while
AP
LICK
L
for right-handed or left-
EFT
Contents
Index
& T
AP
Index
Drag to increase or decrease T
S . Test the new setting in an
ENSITIVITY
application that supports tilt.
The tilt setting applies to both the tip and
eraser of your tool. Tilt is direction
sensitive and can be used in some
applications to control brush orientation or
other characteristics.
When you bring the pen tip within
5 mm (0.20 inch) of the screen surface
without touching the screen and press
the upper or lower side switch, the
selected function occurs.
Tip: To make double-clicking easier,
set the side switch to double-
click automatically by selecting
D C .
OUBLE LICK
37
ILT
37