•
•
•
Lifecycle 9100 and 9500HR Series Exercise Bikes
How To...REMOVE AND REPLACE THE DIGITAL HEART RATE PC BOARD -
Equipped on Model LC9500HR
Tools Required: Phillips screwdriver, pliers
1.
Remove the four SCREWS securing the DISPLAY CONSOLE to the DISPLAY CONSOLE BRACKET.
2.
Unplug the 10-PIN, 4-PIN, and 3-PIN CONNECTOR from the back of the DISPLAY CONSOLE.
3.
Remove the SCREWS securing the back of the DISPLAY CONSOLE to the OVERLAY FACE-PLATE. Set the
OVERLAY face down on a non-abrasive, flat surface.
4.
Ground yourself to the machine by attaching one end of a DISPOSABLE ANTI-STATIC GROUNDING STRAP
to your wrist and the other to a suitable grounding point on the exercise bike (e.g.: the metal part of the pedal
crank shaft).
Display Console model
shown for reference only.
5.
Use the pliers to squeeze the tips of the five SPACERS, one at a time, to allow removal of the HEART RATE
PC BOARD. Before lifting the HEART RATE PC BOARD from position,
be aware that an S-PIN
CONNECTOR is also securing the back of the board in place.
6.
Replace any damaged SPACERS with those included in the kit.
7.
Reverse Steps 1 through 5 to replace all parts in their proper positions.
19