Lifecycle 9100 and 9500HR Series Exercise Bikes
How To...REMOVE AND REPLACE THE PEDALS
•
Tools Required: 5/8 inch open end wrench
1. To remove the LEFT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and tum the wrench
clockwise.
2.
To remove the RIGHT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and tum the wrench
counterclockwise.
•
Torque
6-12 ft. Lb••
Torque
6-12 ft. Lb•.
---------- --«:-----
jL)J
Remove
~
•
3.
Install the new PEDALS onto the CRANK ARMS. To tighten the PEDALS, place a 5/8 inch open end wrench on
the PEDAL BOLT. Move the wrench counterclockwise for the LEFT PEDAL and clockwise for the RIGHT
PEDAL.
21