Life Fitness Lifecycle 9100 Service Manual page 111

•
Lifecycle 9100 and 9500HR Series Exercise Bikes
INSTALLATION INSTRUCTIONS Model LC91 00
If the bike is not stable, rotate the FOOT in the STABILIZER BAR that
appears to be higher until the Lifecycle bike is stable.
Secure the position of the FOOT by tightening the LOCKNUT with an
open-end wrench.
Step 11
After placing the Lifecycle bike in the intended location for use, check
the stability of the bike.
•
OPERA TION CHECKLIST
::::} Insure that the STABILIZER BAR and HANDLEBAR BOL TS are tight.
Make sure the exercise bike is properly leveled and stable.
•
9
u