SIP User's Manual
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
3.3.4.2.2 Configuring DTMF and Dialing Parameters
The 'DTMF & Dialing' page is used to configure parameters associated with dual-tone multi-
frequency (DTMF) and dialing. For a description of the parameters appearing on this page,
refer to "Configuration Parameters Reference" on page 213.
To configure the DTMF and dialing parameters:
1.
Open the 'DTMF & Dialing' page (Configuration tab > Protocol Configuration menu
> Protocol Definition submenu > DTMF & Dialing
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
Version 5.8
button to save your changes.
Figure 3-59: DTMF & Dialing Page
button to save your changes.
93
3. Web-Based Management
Saving Configuration''
page item).
Saving Configuration''
September 2009
on page
167
.
on page
167
.