Figure 3-72: Sas Configuration - AudioCodes Media Pack MP-124 User Manual

SIP User's Manual

To configure the Stand-Alone Survivability parameters:
1. Open the 'SAS Configuration' page (Configuration tab > Protocol Configuration
menu > SAS submenu > Stand Alone Survivability
2. Configure the parameters as described in ''SIP Configuration Parameters''
252 .
3. Click the Submit
4. To save the changes to flash memory, refer to ''
To configure the SAS Routing table, under the SAS Routing group, click the SAS Routing
Table
refer to ''Configuring the IP2IP Routing TablE (SAS)'' on page 122.
Version 5.8
Figure 3-72: SAS Configuration Page
button to apply your changes.
button to open the 'IP2IP Routing Table' page. For a description of this table,
page item).
Saving Configuration''
121
3. Web-Based Management
on page
on page 167
September 2009
.