Modifying An Ini File - AudioCodes Media Pack MP-124 User Manual

4.3

Modifying an ini File

You can modify an ini file currently used by the device. Modifying an ini file instead of
loading an entirely new ini file preserves the device's current
factory default values.

To modify an ini
1. Save the current
to ''Backing Up and Restoring Configuration''
2. Open the ini file (using a text file editor such as Microsoft Notepad), and then modify
the ini file parameters according to your requirements.
3. Save the modified
4. Load the modified
interface (refer to ''Backing Up and Restoring Configuration''
Tip:
SIP User's Manual
file:
ini file loaded on the device to your PC, using the Web interface (refer
ini file, and then close the file.
ini file to the device, using either the BootP/TFTP utility or the Web
Before loading the ini file to the device, verify that the file extension of the ini
file is correct, i.e., *.ini .
on page 175
194
MP-11x & MP-124
configuration, including
).
on page 175 ).
Document #: LTRT-65412