Figure 8: Connection Error Message - Kramer MultiTOOLS 850 User Manual

Note: If the drop-down list shows No USB Devices, then either you have not
installed the USB driver (see
6. Click Connect.
If the connection is not successful, a Timeout error message appears as
shown in
in Figure 9

Figure 8: Connection Error Message

5.2.2 Controller Software Main Window
The Controller Software Main Window is shown in
14
Section
Figure 8. If the connection is successful, the main window shown
appears.
4.1.2) or the installation was not successful.
Figure
850 - Operating the 850 Pattern Generator
9.