Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kramer 811
Summary of Contents for Kramer 811
- Page 1 Kramer Electronics, Ltd. USER MANUAL Model: Video / Audio Generator...
-
Page 2: Table Of Contents
Defining the 811 Test Patterns Technical Specifications Figures Figure 1: 811 Video / Audio Generator – Front and Rear View Figure 2: 811 Video / Audio Generator Underside Figure 3: Connecting the 811 Video / Audio Generator Figure 4: Connecting the Balanced Stereo Audio Output... -
Page 3: Introduction
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com 4 To simultaneously genlock several video sources in a studio... -
Page 4: Your 811 Video / Audio Generator
Offers 74 static or moving patterns, all of which are available in each video standard Transmits a video signal to each output simultaneously The 811 can be rack-mounted using the RK-80 19” rack adapter. To achieve the best performance: Connect only good quality connection cables, thus avoiding interference,... -
Page 5: Table 1: Front Panel 811 Video / Audio Generator Features
PK Dipswitches 1 2 3 4 Power Connector with Fuse Figure 2 and Table 3 define the 811 underside BB trimmers (lower right side): 1 Several pattern numbers (specified in Table 5) freeze the moving pattern on the screen 2 For component video, connect all three connectors: Y, U, and V (also known as: Y, B-Y, and R-Y, and sometimes called Y, Cb, and Cr) 3 DIPs 1 and 2 are not used. -
Page 6: Figure 2: 811 Video / Audio Generator Underside
Figure 2: 811 Video / Audio Generator Underside Table 3: Front Panel 811 Video / Audio Generator Underside Features Feature BB OFFSET Trimmer BB GAIN Trimmer 1 Insert a screwdriver into the small hole and carefully rotate it to adjust the level... -
Page 7: Installing On A Rack
1 Always mount the machine in the rack before you attach any cables or connect the machine to the power. If you are using a Kramer rack adapter kit (for a machine that is not 19"), refer to the Rack Adapters user manual (download it at: http://www.kramerelectronics.com) for installation instructions... -
Page 8: Connecting The 811 Video / Audio Generator
Connecting the 811 Video / Audio Generator Connecting the 811 Video / Audio Generator To use your 811 Video / Audio Generator, connect one or more of the outputs , as the example in Figure 3 illustrates: Connect the BLACK BURST OUT 1 BNC connector to a black burst acceptor (for example, a genlockable camera). -
Page 9: Connecting The Balanced/Unbalanced Stereo Audio Output
Connecting the 811 Video / Audio Generator 6.1 Connecting the Balanced/Unbalanced Stereo Audio Output This section illustrates how to wire: A balanced output connection, see Figure 4 An unbalanced audio output, see Figure 5 Figure 4: Connecting the Balanced Stereo Audio Output... -
Page 10: Operating The 811 Video / Audio Generator
Operating the 811 Video / Audio Generator This section describes how to adjust your video and audio equipment. 7.1 Adjusting your Video Equipment To adjust your video equipment using the 811, do the following: Press the VIDEO PATTERN + or - buttons pattern. -
Page 11: Defining The 811 Test Patterns
Defining the 811 Test Patterns Table 5 describes the 811 test Patterns: Pattern # Name Black burst Color Bars SMPTE Bars Gray Scale bar and Chart 9-14 Full field color raster patterns at 75% amplitude Defining the 811 Test Patterns... - Page 12 28, 29, 33, Crosshatch 34, 35 30, 31, 32 Colored Crosshatch Defining the 811 Test Patterns Display KRAMER: SIMPLE CREATIVE TECHNOLOGY Can be used to: Check the contrast and power stability of the video amplifiers and geometry artifacts at different...
- Page 13 46, 47 Focus Checker-board 1 PLUGE is Picture Line-Up Generation Equipment. The PLUGE pattern checks the black level on the video screen Defining the 811 Test Patterns Display Can be used to: Check the black level (brightness control)
- Page 14 Black and white pixels Modulated steps Pulse and bar Bowtie Hum bar pattern Defining the 811 Test Patterns Display KRAMER: SIMPLE CREATIVE TECHNOLOGY Can be used to: Check the regulation of the CRT video drive power supply circuits Check horizontal and vertical...
- Page 15 Kramer logo Circles (aspect ratio) Defining the 811 Test Patterns Display Note: Press pattern 58 to freeze the test pattern on the screen Note: Press pattern 60 to freeze the moving test pattern on the screen...
-
Page 16: Technical Specifications
The Kramer logo can be activated/deactivated via the rear panel dipswitches, see Table 2 of the 811 Video / Audio Generator 6 x Black Burst: 1Vpp/75 on BNC connectors; 1 x CV: 1Vpp/75 on a BNC connector; 1 x YC: 1Vpp/75 (Y); 0.3Vpp/75 (C) on a 4p connector;... - Page 17 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 18 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the 811 and is the answer not in the manual?
Questions and answers