Remotely Operating the SG-6006 via RS-232 Technical Specifications Figures Figure 1: SG-6006 Front and Rear Panels Figure 2: Connecting the SG-6006 Genlock Multistandard SPG/SDI/Audio Generator Figure 3: Connecting a PC without using a Null-modem Adapter Tables Table 1: SG-6006 Front and Rear Panel Features...
Introduction Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded...
Page 4
Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
• Can be genlocked to an external composite video source via its looping input with selectable termination The SG-6006 is housed in a 19” 1U rack mountable enclosure, and is fed from a 100-240 VAC universal switching power supply. The SG-6006 can be operated via the front panel buttons with an LCD and a user-...
Defining the SG-6006 Genlock Multistandard SPG/SDI/Audio Generator Table 1: SG-6006 Front and Rear Panel Features Feature Function POWER Switch Illuminated switch for turning the unit ON or OFF SETUP / MENU Displays user interface messages and configuration menu LCD Display...
Installing the SG-6006 in a Rack Installing the SG-6006 in a Rack This section describes what to do before installing in a rack and how to rack mount. KRAMER: SIMPLE CREATIVE TECHNOLOGY...
OUTPUT 8 to an input on the Kramer VS-808xl 8x8 Video / Audio Matrix Switcher 1 Switch OFF the power on each device before connecting it to your SG-6006. After connecting your SG-6006, switch on its power and then switch on the power on each device...
• Use front PANEL LOCK button (see Section 7.2 7.1 Operating the SG-6006 The SG-6006 can save and load up to 16 setups via the menu. To use the menu, press the: • MENU button to start or exit the menu •...
Using the SG-6006 Table 2: The SG-6006 Menu Menu Item Submenu Default Value LOAD SETUP NUMBER … 1 to 16 (press ENTER to load) SAVE SETTING AS SETTING NUMBER … 1 to 16 (press ENTER to save) SET UP … FACTORY RESET...
The front panel unlocks Remotely Operating the SG-6006 via RS-232 You can remotely operate the SG-6006 via RS-232 using a device such as a PC. To connect a PC to the SG-6006 unit using the Null-modem adapter provided with the machine (recommended): •...
Technical Specifications rear panel port on the Master SG-6006 unit, as illustrated in Figure 3 PIN 5 Connected to PIN 5 (Ground) PIN 3 Connected to PIN 2 PIN 2 Connected to PIN 3 Female DB9 (From PC) Male DB9...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the SG-6006 and is the answer not in the manual?
Questions and answers