Flex™ Key And Fill Example Cg-350 Set Up - Datavideo SE-3000 Instruction Manual

Flex™ Key and Fill Example CG-350 Set Up
An example set up for the Flex™ Keyer feature would be to supply separate HD-SDI Key and Fill signals
rd
from a Datavideo CG-350 PC. This PC can provide CG overlays of text and graphics via the outputs of a 3
party PCIe video card such as Blackmagic Design's Decklink HD Extreme 3D+.
First ensure the CG-350 software is set up for External key in settings.
The Key signal from the Decklink card is then fed to input 15 on the SE-3000 (see diagram below). Tap on
Flex™ Keyer Key (Foreground) and then select button 15 from the Aux Bus row on the Control Panel.
If the Fill signal from this card is fed to input 16 then you would tap on Flex™ Keyer Fill (Background) and
then select button 16 from the Aux Bus row.
Look at a Preview of the Flex™ output on a Preview/Auxiliary monitor. Tap on Flex™ Keyer Enable to
turn the keyer ON.
If everything is cabled correctly (as shown below) then you should be able to see the output from the PC/
CG-350 software on top of the Previewed Flex images.
36