Example Se-2800 And Cg-350 Set Up; How To Obtain Software Or Firmware For The Se-2800 - Datavideo SE-2800 Instruction Manual

DIGITAL VIDEO SWITCHER

Example SE-2800 and CG-350 Set Up

An example set up for the DSK1 and DSK2
feature would be to supply separate HD-SDI
Key and Fill signals from a Datavideo CG-
350 Character Generator PC. This PC can
provide CG overlays of text and graphics from
the outputs of a 3rd party PCIe video card such
as Blackmagic Design's Decklink HD Extreme
3D+ card.
1. Ensure the CG-350 software is set up for
External key in its settings.
2. The Key signal from the Decklink card is then
fed to input 9 on the SE-2800 (see diagram
below). Press and hold down the DSK1 button
on the lower row. The Preset row of input
If you have two CG-350 computers then the same
steps can be used for DSK2 set up but using
inputs 11, 12 and the second CG-350 PC.
If you have an SE-2800 with only eight input
channels, then you could set up a single key and
fill DSK, using inputs 5 and 6. This leaves six
How to obtain software or firmware for the
SE-2800
The latest Firmware updates and Software
applications for this switcher can be obtained by
contacting your local Datavideo office or dealer. A
22
sources will light, choose input 9. The input will
flash to confirm it is selected. This selection
will also be confirmed on the HDMI Multi-view,
with a T1 shown next to the selected input
image.
3. The Fill signal from the Decklink card is then
fed to input 10 on the SE-2800 (see diagram
below).
4. Now go into the multi-view menu by pressing
ENTER on the SE-2800 keyboard. Navigate
to DSK SETTINGS > TITLES 1 and choose
TITLES + a-CH MODE. The SE-2800 will
automatically use inputs 9 and 10 as key and
fill.
other video input channels to work with.
If you have an SE-2800 with only eight input
channels and need to use two DSKs then
separate Luma key set ups can be created using
the instructions on page 21. This leaves six other
video input channels to work with.
list of regional Datavideo offices is provided at the
rear of this manual.