Monitor Connections; Multi Image Preview; Multi Image Preview - Initial Set Up - Datavideo SE-3000 Instruction Manual

Monitor Connections

Multi Image Preview

It is possible to operate the SE-3000 with just one or two monitors connected. The Multi Image Preview can
be supplied from a combination of the Multi-1 HD-SDI, Multi-2 HD-SDI or DVI-D output. Using one or two of
these outputs you can display all inputs plus next source Preview and Program output as well as selected
image Stills 1 and 2.
The Multi Image Preview will also confirm basic tally information on these screens too by highlighting the live
source image with a red border, and the cued/next source image with a yellow border.
If the Multi Image Preview is supplied from the Multi-1, Multi-2 outputs (see page 11), then two Datavideo
TLM-170H monitors could be used. Alternatively you could use two Datavideo DAC-8 converters to change
HD-SDI signals to HDMI and then feed these signals to two compatible LCD / LED panels of your choice.
If the Multi Image Preview is supplied from the DVI-D output connection, a DVI-D to HDMI cable could be
used. Please ensure your chosen DVI-D or HDMI monitor is able to accept the mixers output
resolution, for example 1920x1080@60Hz.
Multi Image Preview – Initial Set Up
The Multi Image Preview can be displayed in 5 different user selectable layouts.
To configure the layout press the OUTPUTS button in the Menus button group of the SE-3000 Control Panel
/ Keyboard.
Now look at the Touch Screen Menu Panel and tap on the word MultiViewer in the yellow options area.
17