Dve Transitions Menu; Transition Selection; Home Menu - Length Of Transition; Me Trans - Datavideo SE-3000 Instruction Manual

DVE Transitions Menu

There are over 80 different DVE Transitions to choose from when using the SE-3000 mixer.
Example: To select a different DVE Transition, press the TRANS button in the Menus button group of the
Control Panel / Keyboard. Ensure the DVE and BGND buttons are ON see page 20 Transitions Group.
Now look at the Touch Screen Menu Panel. A page of 16 transition Icons is displayed.
Each TRANS Icon is blue and white. White represents the current Program image and Blue represents the
Preset / Next source image. The shape and edges of these White and Blue areas within each Icon gives an
idea of what the selected DVE transition will look like when used on screen. Use the Arrow Up and Down
Touch Screen buttons to the right of the TRANS Icons to display the next page or the previous page.
It is possible to see or test the effect of a chosen DVE transition in the Preview Monitor before using it on the
Program output. See Previewing a selected transition on page 21.

Transition Selection

To select a DVE transition tap on an Icon or tap on the transition number in the bottom left hand corner and
then enter a number using the keypad. The current or selected DVE transition will have a Yellow border.
Home Menu – Length of Transition
Press the HOME button in the Menus button group of the Control Panel / Keyboard. Now look at the Touch
Screen Menu Panel. There are 3 options across the bottom of the Touch Screen. These are ME, DSK and
FTB Trans. The values below each of these transition options relate to the length of the transition in frames.

ME Trans

Is the value used by the AUTO TRANS button when using a MIX, WIPE or DVE transition between Program.

DSK Trans

Is the value used by the DSK Transitions button group when mixing between two different DSK sources.

FTB Trans

Is the value used by the FTB or Fade To Black button when Enabled.
25