Dvi Input - Input 8; Input Channels 9~16 - Datavideo SE-3000 Instruction Manual

DVI Input – Input 8
NOTE: When the DVI Input option is enabled HD-SDI input 8 is replaced with the DVI input source video. On
the MultiViewer output, the name of input 8 is changed to 'DVI Input'
Use the INPUTS button from the Menus button
group of the SE-3000 Control Panel / Keyboard
then look at the Touch Screen Menu Panel. Tap
on DVI Input and then tap below Enable so it
displays as On.
HDMI sources could be connected here using
a DVI-D to HDMI cable. Avoid using sources with
HDCP protected video.

Input Channels 9~16

NOTE: Units with only 8 inputs can be upgraded to 16 inputs, please speak with your local Datavideo
supplier for upgrade availability and price.
Inputs 9~16 can be used to input Standard Definition or High Definition SDI sources depending on the
INPUTS setting for each. Press the INPUTS button in the Menus button group of the Control Panel /
Keyboard. Now look at the Touch Screen Menu Panel.
Tap on Inputs and then tap on the required input channel number. For our example we have chosen Input 9
and changed it to accept an SD-SDI 16:9 or Anamorphic video input by using the SD Full Screen option.
The DVI input can be set to accept computer DVI-D inputs at resolutions of
1280x720, 1024x768 or 800x600 depending on the graphics capability of the
Computer or Laptop connected. However, it is best to supply video inputs that
match the resolution of the mixer where possible.
Please note that SD Full Height and SD Full
Width can be used with 4:3 aspect video.
SD Full Height will show black columns at either
side of the 4:3 video.
SD Full Width will show black bars above and
below the 4:3 video.
HD Input returns the channel to an HD-SDI input.
15