Control Panel To Main Unit Ethernet Connection; Power; Main Unit; Control Panel - Datavideo SE-3000 Instruction Manual

8 / 16 channel switcher
Hide thumbs Also See for SE-3000:
Table of Contents

Advertisement

Control Panel to Main Unit Ethernet Connection

The Control Panel / Keyboard
communicates with the SE-3000
Main unit using the supplied 3m
Ethernet (straight through) patch
cable. There is one Ethernet port
on the rear of the Control Panel /
Keyboard and two Ethernet ports
on the rear of the Main unit. Use
any of these Ethernet ports for
connecting the Control Panel to
the Main unit.
The
Main
Unit
can
also
communicate over a simple Static
IP PC network using a cross over Ethernet cable direct to a PC as shown above. In order to use this feature
additional Windows based software is required. Please register your unit using the link below in order to
receive this free application and the PC set up instructions.
http://www.datavideo.info/en/productReg.php
Please note; using the Ethernet connection across an existing DHCP network may delay communication
with the mixer. The default IP address for the Control Panel is 192.168.1.115 and the Main unit is
192.168.1.114. Both units can communicate with each other across an existing DHCP network but the IP
addresses mentioned above need to be allowed on the network as static IP addresses. You may need the
help of an I.T. specialist when setting up the DHCP server in this way otherwise conflicts may occur.

Power

Main Unit

Connect the supplied 12V 10A power supply to the 4pin XLR DC Power Input on the rear of the Main Unit.
The power supply should be connected to a suitable mains electric outlet using the supplied mains cable. A
case earth connector is also provided.

Control Panel

The Control Panel has a 4pin XLR DC In socket on the rear panel, and a 12v 5A power supply is supplied. A
case earth connector is also provided.
There are two power ON/OFF switches to look at on the SE-3000, one on the Main unit and another on the
Control Panel / Keyboard. Start the Main unit first and then the Control Panel.
Main Unit On / Off Switch
Control Panel On / Off Switch
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents