Table of Contents
Advertisement
Menu Options
This section covers the Menu options in the order that they appear on the screen. These settings are explained in
detail in the sub-sections. Options may vary depending on the firmware version in use.
The Main Menu will appear on the Multi view output after the MENU button is pressed. Use
UP/DOWN/LEFT/RIGHT arrows to browse through the Menu and make your selection by
pressing the ENTER button.
Please note that a long press on the up/down arrow buttons will allow the user to change
the parameter values quicker.
Main Options
Sub-Options
Transition
Wipe
Start
Border
Position
Matte
Keyer
Keyer Ctrl
Keyer
Key Source
Fill Source
M/E
Mix Effect
DSK
Downstream Key Effect
FTB
Fade-to-Black Effect
Wipe
Wipe Effect Presets
Soft
Border Softness
Width
Border Width
Luma
Border Color Luma
Sat
Border Color Saturation
Hue
Border Color Hue
X
Horizontal Position
Y
Vertical Position
Luma
Background Matte Luma
Sat
Background Matte Saturation
Hue
Background Matte Hue
Linear
Luma
Type of Keyer
Chroma
Self
Select if only one source is enabled for the keyer (Key source)
Select if two sources are enabled for the keyer (Fill and Key
Split
sources)
Parameter for dark/black areas of the overall foreground key
Lift
image
Parameter for light/white areas of the overall foreground key
Gain
image
Parameter for transparency of the overall foreground key
Opac
image
Bars
Matte
Freeze
Still
Input 4
Key Source Selections
Input 3
Input 2
Input 1
Black
Bars
Matte
Freeze
Still
Fill Source Selections
Input 4
Input 3
Input 2
Input 1
16
Parameters
Advertisement
Table of Contents
