Chapter 2 Connections And Controls; Main Unit - Front Panel; Main Unit - Rear Panel Overview - Datavideo SE-2850 Instruction Manual

Chapter 2
2.1 Main Unit – Front Panel
The front panel on the SE-2850 main unit has a grille for two airflow cooling fans. Please do
not block or cover this grille as the unit may overheat. This grille should also be kept free of
dust. The front panel can be removed by removing the four thumbscrews. A soft brush or
cloth can then be used to clean the grille before attaching it back to the unit.
The power button starts and shuts down both the SE-2850 main unit and its attached
keyboard.
2.2 Main Unit – Rear Panel Overview
1 2 3 4
5 6 7 8
1. Input 1 – SD / HD-SDI
2. Input 2 – SD / HD-SDI
3. Input 3 – SD / HD-SDI
4. Input 4 – SD / HD-SDI / HDMI
5. Input 5 – SD / HD-SDI
6. Input 6 – SD / HD-SDI
7. Input 7 – SD / HD-SDI
8. Input 8 – SD / HD-SDI / HDMI
9. Input 9 – SD / HD-SDI**
10. Input10 – SD / HD-SDI**
11. Input11 – SD / HD-SDI**
12. Input12 – SD / HD-SDI / HDMI**
** Please note inputs 9 to 12 are not present if you have purchased the eight channel SE-
2850. Eight channel units can be upgraded to twelve inputs, please speak with your local
dealer.
Connections and Controls
9 10 11
16
13 15
12
18
17 19
14
13. Connect the SE-2850 keyboard here
14. External Sync Input
15. User Defined SDI Outputs 1~4
16. Sync Output / Ref Loop
17. User Defined Multi view Outputs
18. Ethernet port for PC control & updates
19. Tally Output connector
20. GPI connector
21. RS-422 connector (not currently used)
22. 4pin XLR Power Input connector
23. Grounding Terminal
24. 3pin XLR Audio Inputs
25. 3pin XLR Audio Outputs
10
22 23
20 21
24
25