Integrated Devices Screen - Dell PowerEdge M620 Owner's Manual

Menu Item Description
If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOS
allows compatibility with non-UEFI operating systems. By default, the Boot Mode option is set
to BIOS.
Boot Sequence Retry Allows you to enable or disable the boot sequence retry feature. If this field is enabled and the
system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the
Boot Sequence Retry option is set to Disabled.
BIOS Boot Settings Allows you to enable or disable BIOS Boot options.
UEFI Boot Settings Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6
PXE. By default, the UEFI PXE boot protocol is set to IPv4.
One-Time Boot Allows you to enable or disable a one-time boot from a selected device.

Integrated Devices Screen

Menu Item Description
Integrated RAID Allows you to enable or disable the integrated RAID controller. By default, the Integrated RAID
Controller Controller option is set to Enabled.
User Accessible USB Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On
Ports disables the front USB ports and selecting All Ports Off disables both front and back USB ports.
By default, the User Accessible USB Ports option is set to All Ports On.
Internal USB Port Allows you to enable or disable the internal USB port. By default, the Internal USB Port option
is set to On.
Internal SD Card Port Enables or disables the system's internal SD card port. By default, Internal SD Card Port option
is set to On.
Internal SD Card If set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data is
Redundancy written to the active SD card. Data from this card is copied to the replacement SD card at the
next boot. By default, Internal SD Card Redundancy option is set to Mirror.
Integrated Network Allows you to enable or disable the integrated network card 1. By default, the Integrated
Card 1 Network Card 1 option is set to Enabled.
16
CAUTION: Switching the boot mode may prevent the system from booting if the operating
system is not installed in the same boot mode.
NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to
BIOS disables the UEFI Boot Settings menu.
NOTE: This option is enabled only if the boot mode is BIOS.
NOTE: This option is enabled only if the boot mode is UEFI.
NOTE: This option is displayed only if IDSDM is installed on the system board.
NOTE: This option is displayed only if IDSDM is installed on the system board.