Dell PowerEdge M620 Owner's Manual page 91

Error Code Message Information
Action
HWC2006
Message
LCD Message
Details
Action
HWC2008
Message
Details
Action
HWC2011
Message
LCD Message
Details
Action
HWC3000
Message
Details
Action
HWC3002
Message
Action
HWC3004
Message
Action
If removal was unintended, check presence, then reinstall or
reconnect.
name > is not installed correctly.
The <
name > is not installed correctly. Check connection.
The <
The device may be necessary for proper operation. System
functionality may be degraded.
Check presence, then re-install or reconnect.
A fabric mismatch detected between IOM and mezzanine card
number >.
<
The fabric type for the IOM and mezzanine cards must match.
Check chassis fabric type in CMC GUI and compare to the type of
IOM or mezzanine card.
The riser board cable or interconnect is not connected, or is
improperly connected.
Riser board cable or interconnect failure. Check connection.
The riser blade cable may be necessary for proper operation. System
functionality may be degraded.
Check the riser board or interconnect presence, then reinstall or
reconnect.
name > is removed.
The <
The removed device may be necessary for proper operation. System
functionality may be degraded.
If removal was unintended, check presence of the removed device,
then reinstall or reconnect
number > is removed.
Server <
If removal was unintended, check presence of the server, then
reinsert.
number > is removed.
IO module <
If removal was unintended, check presence of the IO module, then
reinsert.
91