Dell PowerEdge M620 Owner's Manual page 133

Error Code Message Information
Details
Action
VLT0203
Message
LCD Message
Details
Action
VLT0204
Message
LCD Message
Details
Action
VLT0206
Message
LCD Message
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see
name > voltage is greater than the upper critical
The system board <
threshold.
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see
name > voltage is outside of the allowable range.
The system board <
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see
number > < name > voltage is less than the lower
The memory module <
warning threshold.
number > < name > voltage is outside of range.
Memory module <
Getting Help.
Getting Help.
Getting Help.
133