Jumpers And Connectors; System Board Jumper Settings - Dell PowerEdge M620 Owner's Manual

Jumpers And Connectors

System Board Jumper Settings

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
For information on resetting the password jumper to disable a password, see Disabling A Forgotten Password.
Table 3. System Board Jumper Settings
Jumper Setting
PWRD_EN
NVRAM_CLR
(default)
(default)
Description
The password feature is enabled.
The password feature is disabled.
The configuration settings are retained at system boot.
The configuration settings are cleared at the next system boot.
(If the configuration settings become corrupted to the point
where the system does not boot, install the jumper and boot
the system. Remove the jumper before restoring the
configuration information.)
6
65