Operation; Source Mode; Controlling A Tuner - Crestron Adagio AES Operation Manual

Crestron Adagio™ AES

Operation

Select a Source
Operations Guide – DOC. 6456B
Prior to using this section, refer to the QuickStart Guide (Doc. 6457) that is included
with the AES.
For instructions on using the APAD and the C2N-DBF12 with the AES refer to the
latest version of the Out-Of-The-Box Functionality Guide (Doc. 6493).
Operating the AES is broken down into three modes:
•

Source Mode

•
Room Mode
•
Turn Off the System
Source Mode
Source mode is used to select and control sources that are connected to the AES. A
selected source can also be routed to any room or rooms connected to the AES or a
connected AAE.
To select a source:
•
Press Source to put the AES in Source mode. The current controlled source
is displayed on the LCD.
Source Mode
SOURCE
ROOM
HOUSE
MENU
Control
•
Turn the selection knob until the desired source is displayed on the LCD.
Rooms that are connected to the displayed source are indicated on the room
buttons.
•
Press the ENTER button (or the soft button labeled Control if it is a device
that can be controlled by the AES) to select and control the source.
When using the out-of-the-box functionality, the AES can control tuner cards
installed in slots 1 and 2, an iPod connected to a CEN-IDOC, and an AAS (when
connected).

Controlling a Tuner

A tuner card installed in either slot one or two can be controlled by the AES front
panel.
The following assumes that a tuner card has been installed in slot one or two (or
both) as described in the tuner card's guide.
Entertainment System
S1 AM/FM
101.90 FM
Stereo
Entertainment System: Adagio AES • 37
BKLT
SCHED
DISPLAY
MORE