Configure Sources; Configure Rooms - Crestron Adagio AES Operation Manual

Entertainment System
About
Adjust the Gain of a Source
32 • Entertainment System: Adagio AES
•
Press the soft button labeled Yes to proceed and restore the default settings
or press No to cancel.
This screen allows you to view information about the AES.
•
Open Installer Tools as described on page 24, select About, and press the
ENTER button. The IP address, IP mask, and Hostname of the AES are
displayed on the LCD.
About
System Information
SOURCE
Addr: 195.168.121.248
ROOM
Mask: 255.255.255.0
Hostname: AES00107f050025
HOUSE
MENU
•
Turn the selection knob to display additional information.

Configure Sources

The gain of each source can be customized from the AES control panel.
To adjust a source's gain:
•
Select a source to adjust by pressing SOURCE and using the selection
knob to select a source.
•
Press and hold the SOURCE and MORE buttons at the same time to open
the Gain control. The soft button labels will change to show the available
control option.
Source Setup Menu
SOURCE
ROOM
HOUSE
MENU
•
Adjust the gain level with the selection knob. Turn clockwise to raise the
gain level or counterclockwise to lower the gain level. Press the soft button
labeled Reset to set the gain level to 0dB.
•
Press MENU to exit.

Configure Rooms

The sound quality, minimum volume, maximum volume and startup volume settings,
of each room can be customized from the AES control panel.
Crestron Adagio™ AES
iPod
Gain 0dB
Reset
Operations Guide – DOC. 6456B
BKLT
SCHED
DISPLAY
MORE
BKLT
SCHED
DISPLAY
MORE